Lubricants for Metal Spinning, Flow Forming, Deep Drawing, Machining,…: Fluids & Solid Metal Forming Lubricants
Castrol Performance Bio NC Plus fluid
exact same formulation as the discontinued Castrol Performance Bio DF R40 fluid
Size: 55-gallon drum (157DE3)
A lighter viscosity bio-based metal forming and cutting fluid formulated with select plant-based oils for use as a multipurpose high performance metal forming and cutting fluid. Castrol Performance Bio NC Plus is recommended for most types of metal forming operations and for cutting most metal types. It is highly effective on most metals including aluminum and stainless steel. Performance Bio NC Plus can be applied by brushing, dipping, spraying or any other suitable method. Superior lubricity optimizes feed rates and increases productivity. Smokes less than petroleum forming fluids, Reduces the amount of pressure required to form the metal. Pleasant smelling for good operator acceptance. Formulated to be non-staining on virtually all types of metals. Better adhesion. Reduces the amount of product required. Outperforms conventional petroleum-based fluids. Does not contain chlorine or sulfur. Plant-based oil reduces the risk of dermatitis. Made from renewable grown plant-based technologies. Reduces disposal costs. Easily removed with alkaline cleaner.
55-gallon drum of Castrol Performance Bio NC Plus fluid (price does not include shipping & tax): US$1,677.00
Contact us for ordering and then we will send to you an ordering/ payment link:
service@globalmetalspinning.com
Castrol Performance Bio SW 68 PBL fluid
Size: 55-gallon drum (157A34)
Castrol Performance Bio SW 68 PBL medium viscosity fluid is ideal for metal forming/ metal spinning applications and is a premium slide way lubricant formulated for lubricating machine tool ways, slides and guides. It is formulated with optimized plant-based oils and select friction-reducing additives to provide excellent lubricity and extreme pressure properties. – Bio-based formulation- Exceptional load carrying and anti-wear properties- Low stick-slip properties provide smooth operation and accurate work even at slow speeds- Good adhesion improves non-drip characteristics- Reduces oil loss- Higher flash point than petroleum-based lubricants- Safer to store and operate.
55-gallon drum of Castrol Performance Bio SW 68 PBL fluid (price does not include shipping & tax): US$2,193.62
Contact us for ordering and then we will send to you an ordering/ payment link:
service@globalmetalspinning.com
Metal Spinning (Forming) Solid Lubrication Wax Bars
Special blend of beeswax, other waxes and other ingredients. Handmade by us right here in Colorado Springs; ideal for metal spinning.
We currently do not ship this item outside of U.S. Continental addresses. Prices include shipping to Continental U.S. addresses.
1 wax bar: $29.61
2 wax bars: $51.15
4 wax bars: $86.49
6 wax bars: $120.72
8 wax bars: $154.33
10 wax bars: $187.68
Contact us for ordering and then we will send to you an ordering/ payment link:
service@globalmetalspinning.com
Forge (HOT Forming / Spinning) Solid Lubrication Sticks
Ideal solid lubrication sticks for hot forming / spinning operations. Synthetic, nonleaded, graphite (10%) wax sticks.
We currently do not ship this item outside of U.S. Continental addresses. Prices include shipping to Continental U.S. addresses.
1 forge stick: $41.77
2 forge sticks: $75.60
4 forge sticks: $135.63
6 forge sticks: $194.81
8 forge sticks: $252.27
10 forge sticks: $311.27
Contact us for ordering and then we will send to you an ordering/ payment link:
service@globalmetalspinning.com
Iloform Stick Wax (Castrol 15AC89), 15 oz per tube
Multi-purpose forming, drawing and cutting compound formulated with a blend of solid lubricating waxes used for a wide variety of forming, drawing and machining operations.
It is suitable for use on all metals, plastics, fiberglass, wood, hardboard, and many other materials. It is also an excellent general-purpose solid lubricant. Periodic application of Iloform Stick Wax directly on cutting surfaces of dies, tools, saw blades, grinding wheels, sanding belts, etc. improves performance. This unique blend of waxes coats metal tools with a long-lasting film that resists abrasion over a wide temperature range.
We currently do not ship this item outside of U.S. Continental addresses. Prices include shipping to Continental U.S. addresses.
1 stick wax tube: $32.47
2 stick wax tubes: $57.18
4 stick wax tubes: $99.17
6 stick wax tubes: $141.94
8 stick wax tubes: $180.82
10 stick wax tubes: $222.89
Contact us for ordering and then we will send to you an ordering/ payment link:
service@globalmetalspinning.com
Castrol Iloform 7425 Chlorine Free Vanishing Oil
Size: 55-gallon drum (14B2E8)
Castrol Iloform 7425 is a low viscosity vanishing oil for light stamping and drawing of sheet metals. It has a nonaromatic, hydrocarbon base with a light color and mild, oily odor. Iloform 7425 is a non-staining product which evaporates completely, leaving no residues. It is a good choice for the manufacture of wires and parts which are to be painted or coated without first being cleaned. Iloform 7425 is designed for use on electrical steel and fin stamping applications. It can also be used for light duty stamping and drawing of thin gauge material. It is compatible with ferrous, zinc galvanized, aluminum, and yellow metals. This product is intended for application as received, by flooding, rolling or dipping. Advantages are: Sheeting action allows oil to evenly spread over metal surface to provide an even lubricating film, non-gumming chemistry leaves machinery and dies clean and free of sticky residues, non-staining and evaporates completely leaving no residues.
55-gallon drum of Castrol Iloform 7425 chlorine free vanishing oil (price does not include shipping & tax): US$1,640.64
Contact us for ordering and then we will send to you an ordering/ payment link:
service@globalmetalspinning.com
Castrol Hysol MB 50, high performing, long-life coolant
Sizes: 55-gallon drum (152CF5) and 5-gallon pail (03117-BEPL)
Your answer to the challenges of modern manufacturing. Multi-applications, multiple metals and harsh operating conditions make it difficult to keep metal working fluids stable. Tramp oil, swarf and waste can leach into the system and promote bacterial growth, reduce the life of the fluid, compromise performance, and ultimately cause the system to fail. Combating this requires constant maintenance intervention that add complexity and cost to your operations. Castrol® Hysol® MB 50 makes a difference in the way you work, saving you time and money.
Castrol® Hysol® MB 50 is formulated to help you:
• Extend fluid life through a robust pH buffer package
• Reduce maintenance burden and machine downtime
• Minimize metalworking fluid usage, limit waste and reduce overall chemical spend
• Increase tramp oil rejection for easier removal, cleaner running systems and increased part cleanliness
Applicable sectors: Aerospace, Automotive, Agriculture, Construction, Engine Manufacturing, Heavy Industry, Job Shops, Machine Manufacturing, Medical, Primary and Secondary Metals, Precision Machining.
Multi-purpose product capabilities: When your business performs a variety of operations over a range of different metals, using a single coolant often seems unachievable and with compromises between quality, practicality and the demand of your operations. Developed to solve multiple challenges, Hysol® MB 50 can take you from a position of compromise to one of strength. It gives you the advantages of a single multi-metal, multi-purpose metalworking fluid with all of the expertise of Castrol® engineering behind it.
55-gallon drum of Castrol Hysol MB 50 (price does not include shipping & tax): US$2,687.05
5-gallon pail of Castrol Hysol MB 50 (price does not include shipping & tax): US$335.14
Contact us for ordering and then we will send to you an ordering/ payment link:
service@globalmetalspinning.com
Additional Forming, Deep Drawing, Hydroforming, Stamping, Machining, Cutting, …, Lubricants
Contact us for pricing: (719) 282-9061
ILOFORM PS 700, ILOFORM PS 326, ILOFORM PS 364, PERFORMANCE BIO NC ULTRA LITE EP, PERFORMANCE BIO NC LITE, PERFORMANCE BIO NC SUPER LITE, Castrol Hysol MB 50, and more.
Contact Us for Our Services & Support, Plus Value Added Products
- tooling engineering & manufacturing
- metal spinning & flow forming rollers
- DURASPIN® material sales
- metal spinning & flow forming training
- programming support & consulting
- on-site service
- remote troubleshooting & repairs
- spare parts
- research & development
- process development & simulations
- upgrades, retrofits, maintenance